Silo semitrailer

O.M.E.P.S. CR 47 Vermietung möglich

O.ME.P.S Tipping Silo Semi-Trailer – Rental Possible

Type: CR 47

Chassis:
Two fully automatically welded I-beams with welded cross members, chassis width 1,400 mm, kingpin 2", tipping cylinder: Hyva

Axles and Suspension: Disc brake 22.5", SAF axle units 3x 9t with air suspension. Axle spacing is 2 x 1310 mm. Lifting and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system. 1st axle is liftable without an air suspension module (SZM). 3rd axle is liftable with Wabco Optiturn.

Rims and Tires:
6 wheels with tires size 385/65 R22.5, according to manufacturer's choice, on Alcoa Dura Bright aluminum rims 11.75 x 22.5 ET 120

Braking System:
Chjdox Nufmjpfx Am Esd
EBS 4S/2M WABCO air brake system with RSS, in accordance with standard 98/12/CE - ECE R13/09. Brake wear indicator connected.

Landing Gear:
Mechanical landing gear with two speeds, 2x 20t support load with swivel foot at the rear, without support.

Electrical System: All lights in LED design. 24-volt electrical system consisting of: One 15-pole socket mounted in front of the fifth-wheel plate on the chassis beam, yellow side marker lights in the required number, position lights at the rear, outline lights at the front, license plate lights at the rear, lights according to standard 97/28/CE-2007/35/CE. 2 multi-chamber lights at the rear at the height of the swivel bearing, mounted on aluminum brackets according to standard 97/28/CE-2007/35/CE. 1 LED work light on the container, yellow warning light at the rear, mounted at the height of the hose pipes. 2 reversing lights in the underrun protection, 2 reversing lights at the height of the supports (each can be switched off on the power console).

Container Design:
One horizontal container made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment container, with 47,000 liters volume. Container warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness is approximately 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40° to +80°.

Filling Options:
4 manholes DN 450 with pivoting and folding dome covers. The dome covers are sealed with 4 wing nuts each. Rubber support for dome covers at the top for storage, closed front rain strip, open rear.

Material Outlet:
1 material outlet cone DN 800 made of INOX, foldable with INOX disc for loosening. Material outlet cone can be pivoted to the side. Shut-off valve DN 150, with white seal. Connection: STORZ-A.

Air Piping:
One 2.5" stainless steel air collector line mounted on the right-hand operating side. One stainless steel air distribution pipe 4" is mounted at the rear of the container. Air valves (shut-off valves) in INOX. Upper air hose and air connection hoses are in 2" STORZ couplings. Micron filter, vacuum valve at the top of the container, 1 vibrator 1m in front of the swivel bearing.

Ladder and Walkway:
1 aluminum ladder is mounted on the left-hand rear side of the vehicle. 1 aluminum safety scissor guard can be erected from below with a separate ladder flap and a locking brake when opened. 1 aluminum safety grating runs along the top of the container on the left side. Anti-slip coating on the container.

Hose Storage:
4 hose pipe containers 5 m length DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings. Hose containers with compressor hose D.76.

Accessories: The side underrun protectio

De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.